Add Ons

Window Breaker Device

The WB2 Window Breaker Device mounts on accessory rail of handgun providing you with a convenient at hand operational tool.
Advantages:

  • Glass breaker is Triggered by Applying Pressure of Handgun Against the Window, Allowing an Officer to Break a Car (or other) Window Without Removing Gun Sights From the Suspect
  • Quick Release Mechanism Fits Picatinny or Weaver Rails
  • Life-Saving, Quick and Clean Glass-Breaking
  • Device Equipped with a Lower Rail, Allowing for the Mounting of Additional Tactical Accessories
  • Easy to fit & convenient to operate
  • Durable, hardwearing & lightweight metal & plastic composite construction
  • Widely Used by Emergency Services, Law Enforcement Agencies and SWAT Teams Worldwide

Dimensions:

  • Weight: 160 gr
  • Width: 68 mm
  • Height: 49 mm
  • Length: 86 mm
Window-Breaker-Device
window-breaker-glock
Magazine-Dust-Cover

Magazine Dust Cover

Rubber dust cover for 5.56X45 magazines. Prevents dust to and mud to enter into the magazine

Eligibility: 5.56mm magazines.

Measurements: Weight 12.00 oz

AK 47 Hand Guard

The Battle Gear Technologies AK 47 Hand Guard is a fully-featured for AK forearm for AK rifles. The Hand Guard System throws away the original AK forearm and offers a developed alternative for the modern shooting methods, a Polymer case for high density and heat resistance, and provides a rigid lightweight platform to mount accessories on four Picatinny rails.

Features:

  • Extended two full length upper and lower Picatinny rails providing excellent mounting positions for optics, bipods, and grips
  • Skeletonized design with reduced weight and improves cooling.
  • Includes two removable 3” side rails for mounting light and laser devices.
  • Constructed of high density polymer for strength and heat resistance.
  • Compatible with most AK style rifles
AK47 Handguard
AK47 Handguard-on gun

Speedlight G2 3V FAB 1 inch Tactical flashlight

Our durable Speedlight G2 3V – 1 inch Tactical Flashlight incorporates a neat State-of-the-Art design for your Tactical Light solutions.

Advantages:

  • 1 inch in Diameter
  • Aerospace 6061 Aluminum Casing Hard Anodized – Mil Spec
  • Provided with the SPL-C Tactical Cover
  • Water Resistant – Up to One Meter
  • Dual Grip-Enhancing Ribbons for Optimal Handling
  • Output- 378 Lumen LED
  • Pressure Activated on/off Tailcap or PTT
  • Powered by a Single CR123 Battery
  • Provides Approximately 1½ hrs. of Constant Runtime
  • See our Adaptor as well

Specifications:

Weight: 69 gr
Diameter: 25 mm
Length: 87 mm

Speedlight G2 3V FAB 1 inch Tactical flashlight
SPEED LIGHT G2 6V 1 inch Tactical flashlight

SPEED LIGHT G2 6V 1 inch Tactical flashlight

The durable Speedlight G2 6V-1 inch Tactical Flashlight incorporates a neat State-of-the-Art design for your Tactical Light Mounting.

Advantages:

  • 1 inch in Diameter
  • Aerospace Aluminum Casing Hard Anodized – Mil Spec
  • Water Resistant – Up to One Meter
  • Four Grip-Enhancing Ribbons for Optimal Handling
  • Provided with the SPL-C Tactical Cover
  • Output – 590 Lumen LED
  • Pressure Activated on/off Tailcap or PTT
  • Powered by Two CR123 Batteries
  • Provides Approximately 1½ hrs.of Constant Runtime
  • See our Adaptor as wellSpecifications:

Weight: 93 gr
Diameter: 25 mm
Length: 121 mm

TLM2 – Tactical Light Mount

The IMI Defense TLM2 Tactical Light Mount is made of high quality fiber reinforced polymer compound material to stand up to the rigors of duty. This IMI Defense quick detach 0.75” and 1” Light Mount TLM  is a lightweight construction and gives a secure and stable platform to mount flashlights. Quick Detach Mount from IMI Defense is reliable for tactical operation, providing a secure mount that will never falter. The TLM2 Tactical Light Mount is designed to provide a light-weight and versatile option to mount a flashlight onto any Picatinny rail system and will allow to mount most lights with a 0.75” or 1″ diameter. Depending on your mounting preferences, the TLM2 can be mounted in such a way that the light can be activated using a tape switch or it can be mounted in such a manner allowing to activate the light using the push button on the back of the light. The TLM2 Tactical Light Picatinny Rail Mount is impervious to most chemicals, solvents and oils and its highly advanced thermoplastics will not shrink. With the high quality and innovative design that you expect from IMI Defense product, the TLM2 Tactical Light Picatinny Rail Mount will keep you in the light and out of the dark.

Features:

•Quick attaches and detaches to Picatinny rails
•Secure C clamp tightens around light or lasers.
•One finger push button operation high quality fiber reinforced polymer compound material
•Easy access to flashlight
•Optional Polymer sleeve included for an easy modification to a 0.75” Flashlights
•Available in colors: Black, O.D. Green or Desert Tan

Specifications:

Weight44 g
Dimensions4 × 3 × 5 cm
Color

, , 

TLM2-Tactical-Light-Mount
pdc_3d

PDC Fab Defense AK/AKM Picatinny Scope Mount Dust Cover

The PDC is an aluminum replacement dust cover with milled picatinny scope mount for the AK/AKM assault rifles. It provides a steady and secure mounting platform for any picatinny based optics on the AK with quick and easy drop in installation.

Advantages of the PDC:

  • Secure mounting platform for any Picatinny based optics
  • Provides a total of 185mm in free picatinny rail space
  • Quick and easy drop-in installation, no gunsmith required!
  • Unique manually adjustable retention mechanism
  • Keeps original iron sights operational
  • Milled of 6061 T6 billet aluminum and steel for optimal strength
  • Matt black hard coat anodized aluminum parts for wear resistance

* Available in matt black only

 

Compatibility: AK/AKM rifles and most variants.
Material: Milled of 6061 T6 billet aluminum and steel for optimal strength

Dimensions:

  • Weight: 202 gr
  • Width: 39 mm
  • Height: 42 mm
  • Length: 243 mm

Glock 17 Slide Cover

TacticSkin Slide Covers are highly-practical upgrades that customize GLOCK Handguns in unique ways, to enhance visibility and style, while also improving performance and versatility

Advantages:

  • Provides improved front and rear serrations for easier, more secure cocking, even while wearing gloves, or with cold, wet, or sweaty hands
  • Protects shooter from slide and barrel heat
  • Made of high-grade, non-slip, polymer composite
  • Quickly and easily installed and removed without a gunsmith
  • Reduces slide wear and tear
  • Available in black, olive drab green, desert tan, red or yellow

Compatibility:

  • TacticSkin 17: Glock 17, 22, 31, 37
  • With TacticSkin installed, all fit into GLOCK soft textile / leather holsters or GLOCK 10mm / .45 kydex / polymer holsters
  • NOTICE: Cannot Be Used With “C” Models!

Specifications:

  • Weight: 25gr
  • Width: 29mm
  • Height: 23mm
Glock-17-Slide-Cover
Glock-19-Slide-Cover

Tactic Skin 19 Fab Defense Glock 19 Slide Cover

TacticSkin Slide Covers are highly-practical upgrades that customize GLOCK Handguns in unique ways, to enhance visibility and style, while also improving performance and versatility

Advantages:

  • Provides improved front and rear serrations for easier, more secure cocking, even while wearing gloves, or with cold, wet, or sweaty hands
  • Protects shooter from slide and barrel heat
  • Made of high-grade, non-slip, polymer composite
  • Quickly and easily installed and removed without a gunsmith
  • Reduces slide wear and tear
  • Available in black, olive drab green, desert tan, red or yellow

Compatibility:

  • TacticSkin 19: Glock 19, 23, 25, 32, 38
  • With TacticSkin installed, all fit into GLOCK soft textile / leather holsters or GLOCK 10mm / .45 kydex / polymer holsters
  • NOTICE: Cannot Be Used With “C” Models!

Specifications:

  • Weight: 25gr
  • width: 29mm
  • Height: 23mm

NVG Universal Helment Mount 

Helmet mount fits securely onto helmet via a rugged strapping device and grooved hooks. With helmet mount, NVD can be positioned directly in front of user’s eyes or flipped.
Fits to ATN NVG 7 night vision goggles, ATN NVM 14 and ATN PS14 Nightvision multipurpose scopes.

    helmet-mount-kit_photo
    head-mount-assembly-nvg-kit_photo

    NVG Goggle Kit 

    Headset with chin strap and flip-up system for “hands free” use.

    MP5 Extended Rail Mount 

    The Battle Gear Technologies MP5 EXTENDED RAIL MOUNT is a tight top mount Picatinny extended rail, ideal for red-point sights and any attachments that need to be placed behind the optic. Larger scopes and accessories can now be mounted on the extended top rail.

    • Strongly secured to the top body part.
    • Allows disassembling/assembling the weapon, but yet maintain zero.
    • Coordinates well with: #X5, #HX3, #HX1, #TPR5, #HX3K, #HX3SD.
    • No gunsmith required
    • Mill-standard
    • Warranty: lifetime
    Eligibility: for MP5/K/SD, G3

    Material: Made Of Aluminum

    Measurements:

    • Weight  50 gr.
    • Length 10.4 cm.
    • Height  2.3 cm.
    • Width  4 cm.
    MP5 Extended Rail Mount
    MP5 Extended Rail Mount 2
    PRG FAB Galil 4 Rail System

    PRG FAB Galil 4 Rail System

    The new PRG Galil Handguard provides an optimal upgrade for your Galil, allowing you to utilize four Picatinny Rails for your optics,foregrips,Bipods or any other Picatinny compatable attachment

    • Enables Four Picatinny Rails for Versatile Mounting Solutions
    • Provides an Extremely Secure Attach of Your Optical Sights and Lasers
    • Facilitates Appropriate Thermal Insulation
    • State-of-the-art Ergonomic Design
    • Durable, Hardwearing & Lightweight Construction
    • Quick & Easy Installation
    • No Gunsmith Required
    • Constructed from Reinforced Polymer Composite
    • Available in Black and Two Camouflage Colors: Desert Tan and Olive Drab Green

    Measurements:

    Weight: 245 gr
    Width: 60 mm
    Height: 83 mm
    Length: 178 mm

    ar15-riser-mount

    RED DOT SIGHT RISER MOUNT

    The AR15 Riser Mount with a quick release lever is designed for mounting the Razor red dot sight onto a flattop style AR-15 rifle as the primary optic. When used in conjunction with the Picatinny clamp included with the Razor, this mount positions the red dot of the Razor in the lower third of the field of view when co-witnessed with the iron sights.

    Note
    The AR15 Riser Mount provides a rise .6 inches (15.3mm) above the base surface. Weighs 3 ounces. Made with pride in the U.S.A.

    • Provides lower 1/3 co-witness with the Razor red dot.
    • Provides absolute co-witness with the SPARC red dot.

    AUTO LOCK LEVER SYSTEM

    The AR15 Riser Mount features the Auto Lock Lever System and has the following advantages:

    • Does not require proprietary tools for adjustment.
    • Can be adjusted with your finger or a flat blade screwdriver.
    • Lever can be configured to lock to the front or the rear.
    • Superior clamping surface ensures maximum rail engagement.

    Materials and Construction

    The mount is precision Computer Numeric Controlled (CNC) machined from a solid block of aluminum and finished in a hard coat anodize for a rock-hard, lasting finish.

    • Precision machined from 6061 T6 aluminum.
    • Hard coat Type 3 Mil-Spec anodized for a lifetime of performance.
    • Fully adjustable to fit both in and out of spec rail systems.

     

    Red Dot Riser

    The Red Dot Sight Riser enables the user to bottom 1/3 co-witness with their A2 height fixed or folding iron sights. Clamp the riser to the accessory rail on your rifle using the supplied hardware and mount your sight to the riser.

    Additional information

    • Weight – 150 gms
    • Colour – Black

    Red Dot Riser