Bulletproof Gear

The NIJ classifies all armors in the following levels:

  NIJ Level IIaNIJ Level IINIJ Level IIIaNIJ Level IIINIJ Level IV
 Areal Density3.5 kg/m4.2 kg/m5.9 kg/m25.9 kg/m32.5 kg/m
.22mm short xxxxx
.9mm xxxxx
.45mm xxxxx
.380mm xxxxx
.38mm xxxxx
.22mm long  xxxx
.44 Magnum   xxx
.30 Carbine    xx
5.56mm    xx
7.62mm NATO    xx
.30-06    xx
.30 Armour Piercing (M2 AP)     x

 

BALLISTIC HELMET

HL3A – Ballistic Helmet – Protection Level IIIA

FEATURES:

  • Bulletproof Kevlar helmet with ballistic protection level III-A.
  • One size fits most.
  • Made of Kevlar.
  • The shape of the helmet allows you to use it with ballistic-proof glasses or masks.
ballistic-helmet
HL3A-Helmet

HL3A helmet Accessory – CAT EYE STRIPS

  • Luminescent (Reflective Tape)
  • Fits Current Military Issue Helmets

03920 : COYOTE
03921 : FOLIAGE GREEN
03922 : OD GREEN
03923 : OCP TAN

cat-eye-strips
Fast-Helmet

FAST BALLISTIC HELMET – PROTECTION LEVEL IIIA

Model: FAST

Protection level: NIJ Standard-0101.06 & NIJ 0106.01 level A

Material: POLYETHYLENE

Suspension: HEAD-LOC

Head circumference: (cm) M56-58 L59-61 XL62-64

Weight (±0.05kg): M: 1.47, L: 1.52, XL: 1.57

Fast Helmet Accessories

GOGGLE BUNGEE QUICK STRAP

goggle-bungee-quick-strap

The Goggle Bungee Quick Strap kits provide an alternative to the traditional goggle strap. The Quick Strap has hook-and-loop strap ends to attach directly to a helmet and also includes rail attachments. The Quick Strap is easily installed in place of the regular strap. Available in Black or Tan 499. This strap kit will fit the OTW, LoPro, and Boogie Sport goggles.

Your content goes here. Edit or remove this text inline or in the module Content settings. You can also style every aspect of this content in the module Design settings and even apply custom CSS to this text in the module Advanced settings.

FAST Helmet Counterweight 

KEY FEATURES:

  • Customizable weight management system designed to enhance comfort and reduce neck strain.
  • (5) 70g removable weights and (5) elastic pockets.
  • Total weight system is 0.85lbs (385g).
  • Elastic pockets can stretch to fit (2) weights or (1) weight and (1) battery (AA, AAA or 123).
  • Mounts to the rear of the helmet with custom anchors using the existing helmet holes with longer ballistic screws (provided).
  • Rear Velcro attachment ensures motion free and secure positioning.
  • Chemlight window and Velcro patch for Glint tape for use with low light IFF.
  • Durable construction.
  • Compatible with Sentry and FAST helmets.
  • Available in Urban Tan or Black.
HEL-STAR-6-Gen-III-Helmet-Mounted,-Multi-Function-Light

HEL-STAR 6 ® Gen III Helmet Mounted, Multi-Function Light

HEL-STAR 6® is a multi-function helmet mounted LED light designed for airborne/MFF, tactical and other military operations.

HEL-STAR 6® combines the basic features of the earlier HEL-STAR 4® & HEL-STAR 5® multi-function marker lights into a compact, integrated design with enhanced omni-directional visibility and easy battery replacement.

The newly refined HEL-STAR 6® Gen III offers a sleek design, integrated tie downs, battery changes without tools, and advanced electronics, including a field re-reprogramming option.

Sliding switches enhance tactile feel and provide positive, intuitive control between the two operating modes and four user-defined functions. Functions can be selected from virtually any combination of White, four different color options, and IR – either flashing or steady. Variable flash rates, intensities and coded signals provide expanded IFF capability.

Independent testing has confirmed that the HEL-STAR 6® Gen III exceeds the FAA’s 3 statute mile visibility requirement and is shock and vibration resistant, dustproof, and open sea waterproof to 130 fsw (laboratory 300+ feet).

HEL-STAR 6® is built on a platform that allows new technology to be incorporated as it becomes available. As mission demands shift and expand, HEL-STAR 6® continues to evolve with changing user needs.

Wireless field re-programming capability is available upon request. Requires the purchase of a Programming Interface Module (PIM).

Other Operating Colors/Signal/Intensity Codes are available. Please contact us or one of our distributors for assistance in determining the best configuration for your operational needs.

Manta Strobe with Webbing Adapter

The Manta Strobe is a helmet mounted multi-spectrum light emitter optimized for Military Operations. Our goal is clear; keep it simple for the end user, provide the highest level of performance through “Select” Electronic components combined with smart programming for highest output and extended battery life.

  • Includes the Manta Strobe Webbing Adapter
  • Zero overt light AD….
  • 100% user confidence in Infrared Mode with Vibrating feedback
  • Intuitive One-handed operation
  • Multiple Infrared and Overt LEDs generate an overlapping and omnidirectional light emission
  • Curved base specifically for helmets
  • Lightest weight and lowest profile in its power class
  • Tool-less battery change out, 3V CR-123
  • Downward (”Low”) facing Infrared Emitter (positive IFF for close in work with minimal glare)
  • Upward (“High”) facing Infrared Emitters (multiple emitters delivering a peak IR signal for maximum distance)
  • IPX8 = Manufacturer Rated – Waterproof 150’, Zero water penetration in Main Housing or Partitioned Battery Compartment
  • Primary Overt LED/s are visible beyond the FAR105.19 requirement (3 Statute Miles)
Manta-Strobe-with-Webbing-Adapter

Hard Armour Plates

Trauma-plate

Trauma plate for Bulletproof vest or body armor

Trauma plate is added to the vest to help lessen the “blunt trauma” bruising (or cracked bone) that happens when a bullet is stopped by the vest. Even though your vest stops the bullet, it still hits like a sledgehammer. A trauma plate helps spread out this impact and lessen the severity of injury to the mid-chest and sternum bone that is so vulnerable just under the skin.

Vest are N I J certified Without a Trauma plate, thus we strongly recommend the Trauma Plate.

Technical details:

  • Plate is made out of  two plates of 3 mm polycarbonate.
  • Between the plates there is a 4 mm foam seperator og GA200.

Dimensions:

  • Size: 6″ x 8″ (150 mm x 200 mm)
  • Weight apx. 0.44 lbs (200gr)

BALLISTIC SHIELDS

COMPACT Ballistic Shield Level 3+

 

The Battle Gear Technologies Compact Ballistic Shield With Level 3+ protection is designed in India. Made from top quality European speciality alloy military-specification ballistic carbon steel, our ballistic shield is built to be portable, versatile and easily deployable for specific use in the Asian operating scenarios. Our compact ballistic shield is designed to work best in CQB situations inside tight corridors and rooms that don’t follow a standardised architectural layout especially where speed and force of action is a crucial requirement to the mission. The materials and their processing were selected to provide optimum ballistic performance against the threat rounds that commonly found in Asia. Our main goal has been to provide the most protection for our troops while keeping the cost affordable so it’s accessible to all units facing constant threats.

Features:

  • The angled handles are more comfortable to carry.
  • Ambidextrous design which enables the shield to be flipped around to be used by a left handed operator as well.
  • Adjustable forearm strap increases control and aids weight distribution.
  • /8″ grade 9 bolts and patent pending design can withstand a hit directly on the bolt without penetration of the shield. (*Note – Most such hits merely slightly bend the bolt, although a dead-centre hit from a .308 may break off the bolt head resulting in a loose handle or strap.)
  • Proprietary military-grade ballistic steel provides unrivaled edge hit and multi-hit performance.
  • Lightweight, durable and exceptional visibility on the move while using weaponry.
  • Can easily be fit into a large backpack and deployed when required.
  • No shelf life limitations. No storage limitations.
  • Extremely rugged, the shield can easily take impacts during transport and storage without any compromise to its ballistic capabilities.
  • Seamlessly integrates into established weapons training protocols
  • Available with optional LED Lighting.

Specifications:

Withstands –

a. 7.62×51 mm Lead core FMJ

150 grain at 2750 fps

b. 7.62×51 mm M80

150 grain FMJ at 2800 fps

c. 7.62×39 mm mild steel core FMJ

123 grain at 2400 fps 

 Dimensions & Weight

Width – 35 cm (13.8”)

Length – 64 cm (25”)

Weight – 9 kg

*Alternate sizes available per customer’s request

Ballistic Shield Front
Ballistic Shield Back
Sniper-Shield

Portable Sniper/Sentry Shield

The BATTLE GEAR TECHNOLOGIES Portable Sniper/Sentry Shield With Level 3+ protection is designed in India. Made from top quality European speciality alloy military-specification ballistic carbon steel, our Portable Sniper/Sentry  Shield is designed to be quickly and easily setup in any kind of operating scenario. With quick and rapid deployment in mind, our Portable Sniper/Sentry  Shield can be setup in a matter of seconds in any environment.

Features:

  • Slopes back at a 15 degree angle.
  • 8×20 cm cutout on one long slide, slightly offset.
  • Steel core, robust polyurethane coating ~ 1.5 mm thick to protect against scratches, dings, and corrosion.
  • Two legs kick down during deployment, can be reversed to other shield side to change cutout to other side for left handed shooter.
  • Proprietary military-grade ballistic steel provides unrivaled edge hit and multi-hit performance.
  • No shelf life limitations. No storage limitations.
  • Extremely rugged, the shield can easily take impacts during transport and storage without any compromise to its ballistic capabilities.
  • Seamlessly integrates into established weapons training protocols
  • Available with optional camouflage add-ons.

 Specifications:

Withstands – 

a) 7.62×39 mm at point blank range.

b) 7.62×51 mm at 50+ meters including slanted.

c) 7.62×39 mm AP at 100+ meters including slanted.

 Dimensions & Weight:

Wide – 70 cm

High – 36 cm 

Tall – 35 cm

Weight – 11.5 kg

*Alternate sizes available per customer’s request